2.4 G Wireless Remote Motor Driver (4 Motors)
Receiver-side 4-motor driver for the 8-button 2.4 G system — drive M0-M3 straight from the handset.
- Material
- PCB & electronic components
- Age range
- 8+
- Category
- STEM Robotics & Electronics
- Customisation
- OEM & ODM available
Specifications, component counts and packaging are configurable. Figures shown reflect our standard configuration.
Key features
- Receiver and motor driver in one: drives M0, M1, M2 and M3 directly from the 8-button handset.
- LEDs indicate motor forward/reverse status.
- One-to-one pairing with memory after power loss; low-power standby on the transmitter after 15 s idle.
- The quickest way to add radio control to any four-motor chassis.
Frequently asked about this product
How does the 2.4 G Wireless Remote Motor Driver (4 Motors) link to my microcontroller?
The 2.4 G Wireless Remote Motor Driver (4 Motors) links over a UART serial connection (TX/RX at 3.3 V TTL, XH2.54 or header pins). Connect it to any Arduino, ESP32 or micro:bit (via adapter) serial port, set the baud rate, and exchange data with simple serial commands — no special driver needed.
What voltage does the 2.4 G Wireless Remote Motor Driver (4 Motors) run on?
The 2.4 G Wireless Remote Motor Driver (4 Motors) runs from a standard 3.3-5 V DC supply (USB or the controller’s 5 V rail). It draws only a few milliamps in normal operation, so it is safe to power from the controller board itself for classroom builds.
What projects is the 2.4 G Wireless Remote Motor Driver (4 Motors) good for?
The 2.4 G Wireless Remote Motor Driver (4 Motors) is built for STEM and robotics education: classroom demonstrations, science-fair projects, robotics club builds and competition robots. It pairs with the rest of our module range — same connectors, same voltage, same toolchain — so students move from first circuit to competition robot without changing platforms.
What certification do the robotics and electronics products carry?
Controller boards, sensors and modules ship with CE marking and RoHS-compliant components, and the range is designed for classroom use under teacher supervision. Product-specific test reports and declarations of conformity are available for distributors on request.
What is the minimum order quantity, and can I get a sample first?
These are standard catalogue lines with stable production, so minimums are low and lead times are short. Samples ship within about a week and are normally credited against a first order. Mixed-SKU cartons are accepted for evaluation orders.
Related products
Need pricing on this line?
Send your target quantity, destination market and any changes you need to artwork, colourway or packaging. We reply with a quotation and the applicable compliance route — usually within one working day.