2.4 G Wireless Remote Transmitter (8-Button)
Eight-button 2.4 G handset in four A/B channel groups — direct motor-driving when paired with its receiver.
- Material
- PCB & electronic components
- Age range
- 8+
- Category
- STEM Robotics & Electronics
- Customisation
- OEM & ODM available
Specifications, component counts and packaging are configurable. Figures shown reflect our standard configuration.
Key features
- Transmitter with 8 buttons in four A/B groups; drives M0-M3 motors through the matching receiver.
- LEDs show motor forward/reverse status on the receiver.
- Pairing: hold PAIRING with the receiver unpowered until the red LED blinks, then power the receiver — red steady means paired; remembered after power-off.
- Low-power standby after 15 s without input.
Frequently asked about this product
How does the 2.4 G Wireless Remote Transmitter (8-Button) link to my microcontroller?
The 2.4 G Wireless Remote Transmitter (8-Button) links over a UART serial connection (TX/RX at 3.3 V TTL, XH2.54 or header pins). Connect it to any Arduino, ESP32 or micro:bit (via adapter) serial port, set the baud rate, and exchange data with simple serial commands — no special driver needed.
What voltage does the 2.4 G Wireless Remote Transmitter (8-Button) run on?
The 2.4 G Wireless Remote Transmitter (8-Button) runs from a standard 3.3-5 V DC supply (USB or the controller’s 5 V rail). It draws only a few milliamps in normal operation, so it is safe to power from the controller board itself for classroom builds.
What projects is the 2.4 G Wireless Remote Transmitter (8-Button) good for?
The 2.4 G Wireless Remote Transmitter (8-Button) is built for STEM and robotics education: classroom demonstrations, science-fair projects, robotics club builds and competition robots. It pairs with the rest of our module range — same connectors, same voltage, same toolchain — so students move from first circuit to competition robot without changing platforms.
What certification do the robotics and electronics products carry?
Controller boards, sensors and modules ship with CE marking and RoHS-compliant components, and the range is designed for classroom use under teacher supervision. Product-specific test reports and declarations of conformity are available for distributors on request.
What is the minimum order quantity, and can I get a sample first?
These are standard catalogue lines with stable production, so minimums are low and lead times are short. Samples ship within about a week and are normally credited against a first order. Mixed-SKU cartons are accepted for evaluation orders.
Related products
Need pricing on this line?
Send your target quantity, destination market and any changes you need to artwork, colourway or packaging. We reply with a quotation and the applicable compliance route — usually within one working day.